Picture of PolySat® TX1051 Pre-wetted Cleanroom Wipers, Non-Sterile

PolySat® TX1051 Pre-wetted Cleanroom Wipers, Non-Sterile

For cleaning production equipment

PolySat® TX1051 pre-wetted cleanroom wipers are made from 100% melt-blown polypropylene with a cut edge, creating a soft wiper ideal for use on sensitive surfaces. TX1051 is pre-wetted with 0.2 µm filtered 70% IPA / 30% DIW for ease of use. The wipes provide a consistent, optimized cleaning efficiency with repeatable wetness and VOC levels. TX1051 PolySat® wipers are packaged in easy-to-use, peel-and-reseal bags, reducing solution evaporation that preserves the consistent wiper wetness level.

Material/Structure: 100% melt-blown polypropylene with a cut edge

Cleanroom Environment: ISO Class 5 - 8, Class 100 - 100,000, EU Grade B - D 

Benefits:

  • Manufactured to provide low levels of particles and extractables creating a wiper suitable for general cleaning and wiping
  • Designed for use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fibers into the process or environment
  • Meets USP <797> and USP <800> wiper requirements.

Part Number: TX1051


€267.14 / Case

Product Specs

Inner Bags: 50 wipers/flexpack Outer Bags: 24 flexpacks/case Wipers Total: 1,200 wipers total/case

Applications

  • Wiping and cleaning surfaces, equipment and parts.
  • Removing lubricants, adhesives and other solutions and processing aids.
  • Cleaning gloves, notebooks, phones or any other item entering the cleanroom.