Test Methods

Texwipe has been the leader in contamination control products for over 40 years and testing our products to the strictest standards is paramount.

We employ test procedures (Basis Weight, Absorbency and Non-Volatile Extractables) from standards organizations such as the American Society for Testing Materials (ASTM), the Association of the Nonwoven Fabrics Industry (INDA) and the Institute for Environmental Sciences and Technology (IEST). We innovated some testing (Particle testing using Scanning Electron Microscopy (SEM) Enumeration, Ion Testing with Ion Chromatography and the measurement of fabric surface resistivity) and developed new accurate and reproducible methods.

We have been diligent in publishing this information in open literature and in making our test methods available.

Select any of our product families in the table below for more information.

Test Method Number & TypeDescription
Test Method 1

Test_Method_N1

Wipers

Nonvolatile Residue (NVR) in Wipers and Other Material

Matter Extractable from Wipers and Other Materials.

To determine the mass of material extractable from a wiper (or other item) using a given solvent.

Test Method 10

Test_Method_N10

Swabs (NVR)

Determining NVR Extractable from Swabs

Procedure for Determining the Nonvolatile Residue (NVR) Extractable from Swabs in a Given Solvent.

One form of swab contamination is the soluble matter extractable in a given cleaning solvent (nonvolatile residue or NVR). NVR contamination can remain on a surface after cleaning with a wetted swab.

Test Method 16

Test_Method_N16

Swabs (ESD) 

Swab Handle ESD Properties

Determination of the Resistance per Unit Length (ohm/cm) of Swab Handles

Swabs can transport charge and generate static charge due to contact with other surfaces. Such charges can subsequently lead to electrostatic discharge (ESD) that can damage products or equipment.

Test Method 18

Test_Method_N18

Wipers

Ions

The Determination of Ions in Wipers by Ion Chromatography (IC)

A rapid analytical technique for qualitative and quantitative determination of a wide variety of ionic species.

Test Method 20

Test_Method_N20

Wipers

Basis Weight

Determination of Basis Weight, Absorbency and Rate of Absorbency of Wipers

Knowledge of wiper basis weight is important since it allows the expression of other measurements in units of either weight or area.

Test Method 22

Test_Method_N22

Wipers

Particle Release from Wipers

Particle Release from Wipers and Other Materials Under Conditions of Moderate Mechanical Stress

This test method details the extraction and enumeration of particles and fibers released from wipers (or other materials) in a wetted state, under conditions of moderate mechanical stress.