Picture of AlphaSat® TX1036 Pre-Wetted Cleanroom Wipers, Non-Sterile

AlphaSat® TX1036 Pre-Wetted Cleanroom Wipers, Non-Sterile

Consistent wetness level

AlphaSat® TX1036 pre-wetted cleanroom wipers are made using AlphaWipe® material, a cut-edge 100% polyester, cleanroom manufactured. The structure allows for a low linting wiper, ideal for cleaning and use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fibers into the process or environment.

AlphaSat® TX1036 product is pre-wetted with 0.2 µm filtered USP-grade 70% IPA / 30% DIW for ease of use. These wipers provide a consistent, optimized cleaning efficiency with repeatable wetness and VOC levels.  

Material/Structure: 100% polyester material with a cut edge

Cleanroom Environment: ISO Class 4 - 8, Class 10 - 100,000, EU Grade A - D 

Benefits:

  • Cleanroom laundered and packaged providing ultra-low levels of ions and non-volatile residues.
  • Meets USP <797> and USP <800> requirements
  • Packaged in easy-to-use, recloseable slider bags, reducing solution evaporation that preserves the consistent wiper wetness level.

Part Number: TX1036


€315.91 / Case

Product Specs

Inner Bags: 75 wipers/reclosable bag Outer Bags: 12 bags/case Wipers Total: 900 wipers total/case

Applications

  • Wiping and cleaning surfaces, equipment and parts.
  • Spill control.
  • Applying and removing lubricants, adhesives, residues and other solutions including disinfectants.
  • Cleaning with solvents such as isopropyl alcohol (IPA), acetone, and degreasers.
  • Cleaning gloves, notebooks, phones or any other item entering the cleanroom.
  • Lining trays for holding, protecting, drying and storing of parts, equipment and devices.
  • Appropriate for use with temperatures less than 400°F (205°C).